TECHPLAST NP  is a Ligno Sulphonate based chloride free normal plasticizer cum water reducer conforming to IS: 9103-1999 and ASTM C 494 Type A. TECHPLAST NP is recommended for use in floor slabs, foundation, column, beams, ceiling & pavement. TECHPLAST NP can be used to reduce cement content to the extent of 8 to 10% by maintaining the original strength specified and workability and reducing the water content required for the given mix. Dosage : 150 ml to 250 ml / 50 kg cement.


High range water reducing and super plasticizing concrete admixture confirming ASTM C 494, Type A & IS : 9103 : 1999.It is ideal for precast concrete, Ready mix concrete and mass concrete. Concrete becomes cohesive and does not have undesirable bleeding, segregation or loss of strength. Dosage : 0.6 % to 1.5 % of cementitious materials.


Non-corrosive, Non-chloride set accelerating admixture for concrete confirming ASTM C 494, Type C. It accelerates cement hydration resulting in shortened setting times and increased early compressive strengths. Typical applications include precast concrete, concrete placed in cold weather, concrete for repairs, mortars for brickwork.  Dosage 1 to 1. 5 ltrs/50 kg. cementitious materials.


Accelerating admixture for unreinforced cement concrete/mortar confirming ASTM C 494, Type C. This further improves strength by enabling water reduction to be made at constant workability. Ideal for providing increased resistance to frost damage during and after construction of hollow blocks. Ideal for block making. Use of TECH FAST SET  reduces the damage in transportation of Blocks. Earlier stripping and reuse of forms increases labor productivity. 600 ml to 1500 ml / 50 kgs. of cementitious materials.


Integral waterproofing liquid admixture for concrete and mortar confirming  IS:2645 : 2003. TECHPLAST LW waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. To minimize permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, internal and external plastering, bathroom floors, water tanks, sumps, drains etc. Dosage : 125 ml to 200 ml / 50 kgs. of cementitious materials.


Integral waterproofing powder admixture for concrete and mortar confirming IS : 2645 : 2003. It improve the effectiveness of water in the concrete and sand:cement mix, enabling desired levels of workability to be obtained with lower water contents. This produces a mix with a reduced water:cement ratio and therefore reduced permeability. Dosage : 200 gms./50 kg. cement.


TECHFIBER PE is a monofilament polyester micro-fiber for concrete reinforcement that complies with ASTM C 1116, Standard Specification for Fiber-Reinforced Concrete and Shotcrete, and is specifically designed to help mitigate the formation of plastic shrinkage cracking in concrete. It highly improves the durability of structure and prevents the shrinkage cracks which are developed during curing making the concrete structure and plaster stronger. It prevents moisture from entering throughout the concrete and mortar structures.


TECHFIBER PP is a High performance crimped monofilament polypropylene fibers and it is a 100 % virgin polypropylene. A unique fiber reinforcement for concrete & mortar. Chemically inert, easily and instantly disperse into the mix, increases tensile and compressive strength, arrest drying shrinkage cracks, reduces permeability and hence ensures water tightness, reduces density, increases yield of mix, reduces number of construction joints in the floor, minimizes steel reinforcements in industrial floors, improves durability.