CRACKPACK:

CRACKPACK is a thixotropic polymer modified. cement based single component crack repair mortar. It does not shrink. It sets quickly on application and can be over coated with common paints / coatings. Can be used for horizontal, vertical and overhead applications. Shrinkage cracking eliminated.

CRACKPACK AR :

CRACKPACK AR is a single pack, highly flexible white, ready mixed acrylic polymer based crack repair paste. It is specially formulated for filling cracks and will not allow water penetration. CRACKPACK AR is a ready to use advance polymer is formulated non-toxic and anti-fungal. Can be used for cracks in exposed conditions on plaster, masonry or concrete up to 20mm width  Environmentally friendly.

TECHROC CM :

TECHROC CM is a prepacked two component cementitious repair system consisting of ready to use polymer modified mortar and polymer modified primer. The mortar contains specially processed cement and polymer with graded fillers and additives to impart adhesion, strength and weather resistance.

TECHROC EP :

TECHROC EP is a solvent free, epoxy based high strength repair concrete, which is supplied as three component system and the coarse aggregate in the ratio recommended to be added at site. SAYOROC EP provides a quick strong repair for concrete and masonry. TECHROC EP is used to repair spalled columns, soffits, gutters, lintels etc., It is also used for repairing of damaged concrete floors, spalled concrete roads and runways.

TECHROC HC (F) :

TECHROC HC (F) is a ready to use fiber reinforced product in grey powder form, which requires only the on-site addition of water to produce a high strength, non-shrink micro concrete of predictable performance. The low water requirement ensures high early strength and long-term durability. For larger repairs, mixed TECHROC HC (F) can be modified by the addition of 10 mm clean, graded, saturated, surface dry aggregates at site.

TECHROC HC :

TECHROC HC  is a ready to use  product in grey powder form, which requires only the on-site addition of water to produce a high strength, non-shrink micro concrete of predictable performance.

TECHROC PR :

TECHROC PR is two component polyester resin based specially designed to both fill and harden the resin mortar. Mixing of the two component produces a rapid setting compound, the consistency of which may be altered by adjusting the resin to filler ratio.