TECHCURE RB:

TECHCURE RB is aluminized resin based liquid curing membrane for protecting concrete from loss of water during the early stage of the curing period. It is supplied as single component liquid which is ready for immediate site application. It produces a hard wearing surface, with excellent adhesion properties.

TECHCURE S (WHITE) : :

TECHCURE S (WHITE) is supplied as a white pigmented, non stainy, non toxic aqueous solution which when applied to fresh concrete surfaces, reacts with free lime and seals the pores, thus reducing the evaporation of water from the mix which assists curing process and increasing durability. Applied surfaces can be easily identified due to white pigment.

TECHCURE S : 

TECHCURE S is supplied as a clear non stainy, non toxic aqueous solution which when applied to fresh concrete surfaces, reacts with free lime and seals the pores, thus reducing the evaporation of water from the mix which assists curing process and increasing durability

TECHCURE WAX (WHITE) :

TECHCURE WAX (WHITE) is a white pigmented low viscosity wax emulsion which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non-penetrating continuous film immediately upon contact with a cementitious surface. This impervious film permits more efficient cement hydration, thus reducing shrinkage and increases durability.

TECH RELEASE : 

TECH RELEASE is a concentrated pale amber liquid which turns white when diluted with water produce a chemical release agent combining the outstanding physical release properties of a chemical release agent together with the economy of conventional mould oil.

TECH RELEASE S :

Solvent based ready to use mould release agent. It helps to prevent cement paste sticking to the mould surface, which in turn enables air to escape from the face when the concrete is poured and vibrated. The number of blowholes is kept to an absolute minimum and the cleaning of the mould surface is made much easier.